HX3 components and parts

 

The tonewheel organ on a single board!

HX3.5 boards come with integrated CaM rotor, with firmware installed for standard presets and MIDI input (easily changeable to other scan boards).

Some soldering experience and technical skills may be required for installation.

HX3 components and parts

Also note our Wiki with all installation manuals and documents!

 


Display per page
Sort by
1 - 30 of 49 results
Product no.: hx35-board

Hammond B3 emulation module HX3, fully self-contained. New version mk5 with RealOrgan Engine (standard licence)  installed, 126 additional GM Sounds.

Unfortunately, the worldwide microchip supply crisis also affects the FPGA that is the heart of the HX3 sound engine. Our purchasing costs have increased by 1500%. We have to share some of these costs and therefore apply a surcharge of 70 Euro until the end of the crisis.

Current export price (outside EU): €561.35

668.00 *
Delivery weight: 200 g

In stock

Product no.: hx35-upgrd-board

We supply the new HX3.5 mainboard in exchange for your HX3 mk4 mainboard and transfer your licenses.

Please send the HX3 mk4 board to:

KeyboardPartner UG
Ithweg 37
D-30851 Langenhagen

Unfortunately, the worldwide microchip supply crisis also affects the FPGA that is the heart of the HX3 sound engine. Our purchasing costs have increased by 1500%. We have to share some of these costs and therefore apply a surcharge of 70 Euro until the end of the crisis. 

Current export price (outside the EU): 436,98 €

520.00 *
Delivery weight: 200 g

In stock

Product no.: hx35 extended licence

Licence key for HX3.5 TrueOrgan Engine (additional organs). Enter your HX3
serial number into field "Order Remarks" on checkout or simply order with HX3.5
board  or new HX3 device.

Enter your HX3 serial number into field "Order Remarks" on checkout.

100.00 *
Product no.: hx35-extension

Extension Board for HX3.5 mainboard with two additional audio outputs, Leslie control and preamplifier for 9- and 11-pin Leslies, headphone jack, USB interface for parameter control and MIDI over USB. Secondary MIDI OUT.

135.00 *
Delivery weight: 150 g

In stock

Product no.: wifi_DIY

WiFi interface for HX3.5 for control by tablet or smartphone via TouchOSC (for iOS and Android devices) for self-installation.

Export price (outside EU): 41,18€

49.00 *

In stock

Product no.: menupanel

Want to tweak HX3 parameters, monitor MIDI controls, edit presets on the fly? The HX3 MenuPanel might fit your needs.

89.00 *

In stock
can be shipped within 4 days

Product no.: panel16

The Panel16 board eases up connection of operating controls (separate buttons/switches) by grouping all 16 possible controls on one board. Panel16 also has the 4 common preset buttons HX3 supports directly. 16 illuminated buttons (blue/white).

 

85.00 *
Delivery weight: 150 g

In stock
can be shipped within 7 days

Product no.: preset16

Board with 16 preset buttons with indicator LEDs  for up to 15+1 presets per manual.

89.00 *
Delivery weight: 100 g

In stock
can be shipped within 7 days

Product no.: preset12-2

Preset12-2 allows connection of 2x12 "inverse" preset keys as found on B3.

59.00 *
Delivery weight: 100 g

In stock
can be shipped within 4 days

Product no.: dbx9

Drawbar board for up to 9 drawbars for HX3.5 MPX bus, suitable as manual or secondary manual drawbar set. Fully assembled board with 9 drawbars.

85.00 *
Delivery weight: 280 g
Product no.: dbx9 empty

Drawbar board for up to 9 drawbars for HX3.5 MPX bus, suitable as manual or secondary manual drawbar set. Party populated board without drawbars (please order drawbar potentiometers and knobs separately).

28.00 *
Delivery weight: 100 g
Product no.: dbx6 empty

Drawbar board for 3 to 6 drawbars for HX3.5 MPX bus, suitable for equalizer, ADSR envelopes, volume/gain adjustment. Party populated board without drawbar potentiometers (please order drawbars potentiometers and knobs separately).

26.00 *
Delivery weight: 100 g
Product no.: dbx12 B3

Drawbar board with 12 drawbars in B3 configuration for HX3.5 MPX bus, suitable as manual or secondary manual drawbar set.

99.00 *
Delivery weight: 350 g
Product no.: dbx12 H100

Drawbar board with 12 drawbars in H100 configuration for HX3.5 MPX bus, suitable as manual or secondary manual drawbar set.

99.00 *
Delivery weight: 350 g
Product no.: dbx12 empty

Drawbar board for up to 12 drawbars for HX3.5 MPX bus, suitable as manual or secondary manual drawbar set. Partly populated board without drawbars (please order drawbar potentiometers and knobs separately).

29.50 *
Delivery weight: 100 g
Product no.: db-pot

Single drawbar potentiometer, without knob

3.60 *
Delivery weight: 23 g

In stock
can be shipped within 4 days

Product no.: zr-knopf

Drawbar knob for our drawbar slider potentiometer. Available in black, white, grey and brown.

1.70 *
Delivery weight: 5 g

In stock
can be shipped within 4 days

Product no.: ptx4-35

Potentiometer board with 35mm hole spacing for HX3.5 MPX bus.

32.00 *
Delivery weight: 100 g
Product no.: ptx4-35 empty

Potentiometer board with 35mm hole spacing for HX3.5 MPX bus. Partly polulated, please order potentiometers separately.

20.00 *
Product no.: ptx4-25

Potentiometer board with 25mm hole spacing for HX3.5 MPX bus.

32.00 *
Delivery weight: 100 g
Product no.: ptx4-25 empty

Potentiometer board with 25mm hole spacing for HX3.5 MPX bus. Partly polulated, please order potentiometers separately.

20.00 *

Product no.: pot

Potentiometer, 10kOhm linear, vertical mount

2.20 *
Product no.: pot_center

Potentiometer, 10kOhm linear, vertical mount, with middle detent

2.20 *
Product no.: knob_pot

Rotary knob for potentiometer, black, with marking.

1.20 *
Product no.: knob_pot_design

Rotary knob for screw-mounted potentiometer, black, with marking.

1.20 *
Product no.: knob_pot_alu

Aluminum knob for potentiometer, black, with marking.

1.60 *
Product no.: anx8

Analog input board with 8 inputs for HX3.5 MPX bus, suitable for potentiometers or  manual drawbars.

28.00 *
Delivery weight: 100 g
Product no.: extend16

Digital input board with 16 inputs for HX3.5, suitable for buttons or switches.

38.00 *
Delivery weight: 100 g

In stock
can be shipped within 2 days

Product no.: 3pin_header_cable

3pin female connector with cable, suitable e.g. for connecting potentiometers to our ANX8 board or for connecting switches/pushbuttons to our Extend16 board.

0.60 *
Delivery weight: 10 g

In stock

Product no.: fatarscan2

Scan board FatarScan2, for direct connection of Fatar matrix keybeds with up to 61 keys (e.g. types 61TP/8O Waterfall or 61TP/9S). Supports two keybeds (upper and lower manual). HX3 delivers key velocity MIDI output with FatarScan2.

 

59.00 *
Delivery weight: 100 g

In stock
can be shipped within 2 days

*
Price including German VAT (may differ for your country), plus shipping
1 - 30 of 49 results